What is the type and function of mine tires?

As we all know, tires are part of a car. If you want to see which tire is more wear-resistant and depends on the material, then what are the types and functions of mine tires?

What is the type and function of mine tires?

1. According to different structures, it can be divided into two types: radial tires and inclined tires.

2. According to the pattern, it can be divided into four types: rod tires, horizontal pattern tires, mixed pattern tires and off-road pattern tires.

3. According to the size, it can be divided into full-size tires and full-size tires.

Role:

1. Support the overall weight of the vehicle, bear the load of the vehicle, and transmit forces and moments in different directions.

2. Transmit traction and braking torsion to ensure good adhesion between the wheels and the road surface, and improve the power, braking and passability of the car.

3. The car suspension together relieves the impact of the car when driving and attenuates the resulting vibration.

4. Prevent severe vibration and early damage of auto parts, adapt to the high-speed performance of vehicles, reduce noise during driving, and ensure driving safety, operational stability, comfort and energy saving economy.

There are several main raw materials in the manufacture of mine tires?

1. Rubber-natural rubber, synthetic rubber and recycled rubber.

2. Rubber formula-vulcanizing agent, reinforcing filler, anti-aging agent, softener.

3. Fiber materials-curtains and canvas.

What are the safe operating procedures for mine tire workers?

1. Before work, carefully check the necessary instruments and equipment, inject lubricating oil, and check whether the on-site facilities are safe.

2. Barefoot, barefoot, clogs and slippers are prohibited, and labor protection articles and equipment are used correctly.

3. It is strictly forbidden to cross the car pit.

4. Grasp the handbrake before work, enter at low speed, lay the wheels with triangular wood, and hang the "people work" sign on the steering wheel. In particular, the inclined section and out maintenance should take better safety measures.

5. The contact position of the normal car must be accurate and reliable. After rising, it must be supported by reliable wood and iron chairs. It can only run after confirming safety and safety.

6, to start the engine during work, in order to prevent accidents, to notify all relevant personnel.

7, the use of electric jack, tire machine to refuel, check the performance of each part is intact and safe, can not operate the instrument rotating with cloth gloves and cotton gloves.

8. The air compressor is arranged in a place with clean air and safe environment. Strictly implement the safety operation regulations, regularly check the refueling, maintenance and belt loosening, and report the maintenance immediately if there is any problem.

9, the installation, removal of tires and accessories to the correct use of special tools, hammer handle to be firm, hope firm.

10. To inflate all kinds of tires, they must meet the specified air pressure and cannot pollute oil. Tires on the ground. let the wind out. You must walk sideways with steel bars. Can not install cracks and corrosion of serious things, so as to avoid the safety ring off injury.

11, after work to refuel, wipe the line, according to the designated place, arrange the spare tire, tools, do a good job in the site health. Do a good job of shift record and work.